For over 50 years boilermakers around the world have relied on Esco Tools fleet of Rental MILLHOG® boiler tube beveling tools, boiler tube saws, tube expanders and rolling motors for fast efficient tube cutting, tube end prepping and expanding during power plant outages and boiler overhauls. Our products are perfectly suited for maintenance of water wall boiler tubes at biomass processing facilities in preparation for precision welding repairs. We have a wide variety of tube cutting, beveling and alignment tools that help you to get the job done quicker and safer. Watch the video below to see our tools in action!
Browse all of our boiler repair and maintenance tools. We have a wide variety of tools available for both rent or purchase including:
- Boiler Tube Beveling Tools
- Rolling Motors and Tube Expanders
- Boiler Tube Cutting Saws
- Boiler Tube Alignment Clamps
Reach out to us using the form on this page if you have any questions about any of the products or would like to rent or purchase any of our boiler tube repair and maintenance tools. We would be happy to assist you in finding the right tool for your specific application.
0.5″ I.D. – 2.25″ O.D.12.7mm I.D. – 57.2mm O.D.MILLHOG SERIES:GROUND
GROUND I.D. CLAMPING TUBE & PIPE BEVELING MACHINE 0.5” I.D. – 2.25” O.D. 12.7mm I.D. – 57.2mm O.D. Ground Millhog Tube and Pipe Beveling Tool 0.5” I.D. – 2.25” O.D.12.7mm I.D. – 57.2mm O.D. Pneumatic Electric Battery Pneumatic Electric Battery See More Tools Tube and Pipe Beveling Tool. The Ground MILLHOG. The Ground MILLHOG is […]
Learn More
0.625″ I.D. – 3.0″ O.D.15.9mm I.D. – 76.2mm O.D.MILLHOG SERIES:MONGOOSE
MONGOOSE I.D. CLAMPING TUBE & PIPE BEVELING MACHINE 0.625” I.D. – 3.0” O.D. 15.9mm I.D. – 76.2mm O.D. Mongoose Millhog 0.625” I.D. – 3.0” O.D.15.9mm I.D. – 76.2mm O.D. Pneumatic Electric Battery Pneumatic Electric Battery Mongoose MILLHOG The Mongoose MILLHOG is a torque free beveling machine for tube and pipe from 0.625” (15.9mm) I.D. to […]
Learn More
0.75″ I.D. – 3.0″ O.D.19.1mm I.D. – 76.2mm O.D.MILLHOG SERIES:TUBE WEASEL
TubE WEaseL I.D. CLAMPING TUBE & PIPE BEVELING MACHINE 0.75″ I.D. – 3.0″ O.D. 19.1mm I.D. – 76.2mm O.D. Tube Weasel Millhog 0.75” I.D. – 3.0” O.D.19.1mm I.D. – 76.2mm O.D. Pneumatic Electric Battery Pneumatic Electric Battery Tube Weasel MILLHOG The boilermaker proven Tube Weasel MILLHOG performs precision bevels for accurate weld fit-up and fits […]
Learn More
0.5″ O.D. – 3.0″ O.D.12.7mm O.D. – 76.2mm O.D.MILLHOG SERIES:C-HOG
C-HoG O.D. CLAMPING TUBE & PIPE BEVELING MACHINE 0.5” O.D. – 3.0” O.D. 12.7mm O.D. to 76.2mm O.D. C-Hog Millhog 0.5” I.D. – 3.0” O.D.12.7mm I.D. – 76.2mm O.D. Pneumatic Electric Battery Pneumatic Electric Battery C-Hog MILLHOG The C-Hog Beveling machine securely attaches to the tube O.D. with a huge clamp that minimizes chatter and […]
Learn More
.45″ I.D. – 2.25″ O.D.11.4mm I.D. – 57.2mm O.D.MILLHOG SERIES: High Speed HHB-5000
HHB-5000 I.D. GUIDED, HIGH-SPEED TUBE & PIPE BEVELING MACHINE .45” I.D. – 2.25” O.D. 11.4mm I.D. – 57.2mm O.D. HHB-5000 Millhog 0.45” I.D. – 2.25” O.D.11.4mm I.D. – 57.2mm O.D. Straight Right Angle Straight Right Angle HHB-5000 MILLHOG MILLHOG High speed tube bevelers feature a pilot locating system that automatically centers the tool on the […]
Learn More
.45″ I.D. – 4.0″ O.D.11.4mm I.D. – 101.6mm O.D.MILLHOG SERIES: High Speed HHB-10000
HHB-10000 I.D. guided, high-speed TUBE & PIPE BEVELING MACHINE 0.45” I.D. – 4.0” O.D. 11.4mm I.D. – 101.6mm O.D. HHB-10000 Millhog 0.45” I.D. – 4.0” O.D.11.4mm I.D. – 101.6mm O.D. Straight Right Angle Straight Right Angle HHB-10000 MILLHOG MILLHOG High speed tube bevelers feature a pilot locating system that automatically centers the tool on the […]
Learn More
0.75″ I.D. – 4.5″ O.D.19.1mm I.D. – 114.3mm O.D.MILLHOG SERIES:WART
WART TUBE & PIPE BEVELING MACHINEI.D. CLAMPING 0.75” I.D. – 4.5” O.D. 19.1mm I.D. – 114.3mm O.D. Tube & Pipe Beveling Machine. The Wart Millhog 0.75” I.D. – 4.5” O.D.19.1mm I.D. – 114.3mm O.D. Pneumatic Electric Pneumatic Electric Wart MILLHOG is a portable right angle I.D. clamping pipe and tube beveling machine that features an […]
Learn More
1.25″ I.D. – 2.5″ O.D.31.8mm I.D. – 63.5mm O.D.MILLHOG SERIES: FIN
FIN I.D. CLAMPING Fin Fan removal machine 1.25” O.D. to 2.5” O.D. 31.8mm O.D. to 63.5mm O.D. Fin Millhog 1.25” O.D. – 2.5” O.D.31.8mm O.D. – 63.5mm O.D. Pneumatic Pneumatic Fin MILLHOG The Fin MILLHOG tube fin removal machine clamps to the tube I.D. and features a patented cutter blade which separates fin from tube O.D. […]
Learn More
1.25″ I.D. – 6.625″ O.D.31.8mm I.D. – 168.3mm O.D.MILLHOG SERIES: MINI
MINI I.D. CLAMPING TUBE & PIPE BEVELING MACHINE 1.25” I.D. – 6.625” O.D. 31.8mm I.D. – 168.3mm O.D. Mini Millhog 1.25” I.D. – 6.625” O.D.31.8mm I.D. – 168.3mm O.D. Pneumatic Electric Pneumatic Electric Mini MILLHOG The Mini MILLHOG is a ruggedly built beveling machine with a spur gear drive train and bevels all tube and […]
Learn More
1.125″ O.D. – 3.25″ O.D.28.6mm O.D. – 82.6mm O.D.HOG TIE SERIES
TUBE ALIGNMENT CLAMPS 1.125” O.D. – 3.25” O.D.28.6mm O.D. – 82.6mm O.D. HOG TIE 1.125” O.D. – 3.25” O.D.28.6mm O.D. – 82.6mm O.D. Single Tube Double Tube Single Tube Double Tube HOG TIE The Hog Tie boiler tube joint alignment tool speeds the welding process for boiler tube waterwall panel replacement by quickly and […]
Learn More
Rolling Motors and Tube Expanders
Rolling Motorsand Tube Expanders 5/8” I.D. to 4.5” I.D. 15.9mm I.D. to 114.3mm I.D. Rolling Motors and Tube Expanders 0.625” I.D. – 3.0” O.D.15.9mm I.D. – 76.2mm O.D. RT/LT 90 RT/LT 190/280 RT/LT 90 RT/LT 190/280 Rolling Motors ESCO Tool Rolling Motors and Tube Expanders are used for fabricating and maintaining boilers, heat exchangers, and condensers. […]
Learn More
6.0″ O.D. – 60.0″. 152.4mm – 1524.0mm O.D.MILLHOG SERIES:Air Powered Pipe Saw. APS-438.
APS-438 Air Powered Pipe SawStandard Model 6.0” O.D. to 60.0” O.D. 152.4mm O.D. to 1524.0mm O.D. APS-438 Millhog 6.0” I.D. – 60.0” O.D.152.4mm I.D. – 1524.0mm O.D. Pneumatic Pneumatic See the Low Profile Model See the Low Radial Clearance Model See More Products APS-438 MILLHOG The APS-438 MILLHOG is an air-powered saw, that is configured […]
Learn More
6.0″ – 60.0″ O.D. 152.4mm – 1524.0mm O.D. MILLHOG SERIES:Air Powered Pipe Saw. APS-438 LP
APS-438LP Air Powered PipeSaw Low profile 6.0” O.D. – 60” O.D. 152.4mm O.D. – 1524.0mm O.D. APS-438LP Millhog 6.0” I.D. – 60.0” O.D.152.4mm I.D. – 1524.0mm O.D. Pneumatic Pneumatic See the Standard Model See the Low Radial Clearance Model See More Products APS-438LP MILLHOG The APS-438LP (Low Profile) MILLHOG is a compact air-powered saw, that […]
Learn More