Parts

Clamp Ribs expand on the Mandrel and attach the tool directly to the tube I.D. H Series Clamp Ribs use Clamp Pads to efficiently increase their range. The G-03A Clamp Ribs feature a slot that a Retention Band is slid through to shield it from the tube I.D., scale and burrs. Like the G-04 – […]

The New G Series Band for  G-03A Clamp Ribs is captured within the Clamp Ribs for added durability and can not slip off. H Series Clamps use Double Springs for added retention assurance.  Clamp Rib Retention Bands and Springs retain the Clamp Ribs on the Actuator and Mandrel and allow the Clamp Ribs to evenly […]

Not your ordinary screw. The ESCO Blade Lock Screw has both right hand and left hand threads for unmatched holding power. To compliment the ESCO Blade Lock and increase its holding force, we mate the Blade Lock with the double threaded ESCO Blade Lock Screw. The stretching force this screw produces is double that of […]

Base Heads provide a sturdy platform for attaching Membrane and Membrane/Overlay Heads. Base Heads are mounted to the drive shaft of the end prep tool and are for attaching Membrane and Membrane/Overlay Heads. In addition, they feature the ESCOLock Blade Lock that rigidly holds a Bevel Cutter for performing multiple tube weld preparations simultaneously. WART […]

A small part but a big reason why ESCO clamping system stays intact. The steel slotted Spring Roll Pin is used to attach the Draw Rod to the Actuator. When the slot in the Actuator’s threaded neck is aligned with the hole in the Draw Rod this Roll Pin is inserted. Impervious to shock and […]