WART CLAMP RETENTION BAND/SPRING

The New G Series Band for G-03A Clamp Ribs is captured within the Clamp Ribs for added durability and can not slip off. H Series Clamps use Double Springs for added retention assurance.

Clamp Rib Retention Bands and Springs retain the Clamp Ribs on the Actuator and Mandrel and allow the Clamp Ribs to evenly expand and retract when the Draw Rod is activated.

WART CLAMP RIB SELECTOR RIB SETS AND CORRESPONDING SPARES

Clamp Rib Set	ID Range	Mandrel	Retention Spring / Band	Actuator	Actuator Roll Pin	Draw Rod
G-03A	.750in – .905in (19.1mm – 22.9mm)	H-241 – .750in	G-14F	G-17 – .375in	G-15	H-247
G-04	.875in – 1.030in (22.3mm – 26.1mm)	H-241 – .750in	G-14	G-17 – .375in	G-15	H-247
G-05	1.000in – 1.155in (25.4mm – 29.3mm)	H-241 – .750in	G-14	G-17 – .375in	G-15	H-247
G-06	1.125in – 1.280in (28.6mm – 32.5mm)	H-241 – .750in	G-14	G-17 – .375in	G-15	H-247
H-00	1.000in – 1.300in (25.4mm – 33.0mm)	H-220 – 1.000in	H-14A	H-12A – 1.000in	H-11	H-51
H-01	1.250in – 1.600in (31.8mm – 40.6mm)	H-21 – 1.250in	H-14B	H-12 – 1.250in	H-11	H-51
H-02	1.525in – 1.925in (38.8mm – 48.9mm)	H-21 – 1.250in	H-14B	H-12 – 1.250in	H-11	H-51
H-03	1.850in – 2.250in (47.0mm – 57.2mm)	H-21 – 1.250in	H-14B	H-12 – 1.250in	H-11	H-51
H-04	2.175in – 2.575in (55.2mm – 65.4mm)	H-21 – 1.250in	H-14B	H-12 – 1.250in	H-11	H-51
H-05	2.500in – 2.900in (63.5mm – 73.7mm)	Attaches to H-02, H-03 or H-04
H-08	3.475in – 3.875in (88.3mm – 98.4mm)	Attaches to H-02, H-03 or H-04