WART MANDRELS

Mandrels are gun drilled, heat treated and the threads are precisionally ground for extreme duty and maximum life.

Three Mandrels are offered: the 1.250in being the most common and the 1in and .750in Mandrels for small tubes that require the stability and power the Wart offers.

WART CLAMP RIB SELECTOR RIB SETS AND CORRESPONDING SPARES

Clamp Rib Set	ID Range	Mandrel	Retention Spring / Band	Actuator	Actuator Roll Pin	Draw Rod
G-03A	.750in – .905in (19.1mm – 22.9mm)	H-241 – .750in	G-14F	G-17 – .375in	G-15	H-247
G-04	.875in – 1.030in (22.3mm – 26.1mm)	H-241 – .750in	G-14	G-17 – .375in	G-15	H-247
G-05	1.000in – 1.155in (25.4mm – 29.3mm)	H-241 – .750in	G-14	G-17 – .375in	G-15	H-247
G-06	1.125in – 1.280in (28.6mm – 32.5mm)	H-241 – .750in	G-14	G-17 – .375in	G-15	H-247
H-00	1.000in – 1.300in (25.4mm – 33.0mm)	H-220 – 1.000in	H-14A	H-12A – 1.000in	H-11	H-51
H-01	1.250in – 1.600in (31.8mm – 40.6mm)	H-21 – 1.250in	H-14B	H-12 – 1.250in	H-11	H-51
H-02	1.525in – 1.925in (38.8mm – 48.9mm)	H-21 – 1.250in	H-14B	H-12 – 1.250in	H-11	H-51
H-03	1.850in – 2.250in (47.0mm – 57.2mm)	H-21 – 1.250in	H-14B	H-12 – 1.250in	H-11	H-51
H-04	2.175in – 2.575in (55.2mm – 65.4mm)	H-21 – 1.250in	H-14B	H-12 – 1.250in	H-11	H-51
H-05	2.500in – 2.900in (63.5mm – 73.7mm)	Attaches to H-02, H-03 or H-04
H-08	3.475in – 3.875in (88.3mm – 98.4mm)	Attaches to H-02, H-03 or H-04

WART CUTTERHEADS AND CORRESPONDING SPARES

Cutterhead	Corresponding Mandrel	Blade Lock	Blade Lock Screw
H-242 – 2.625in	H-241 – .750in	H-22 (3/per head)	H-23 (3/per blade lock)
CH-20 – 2.625in	H-21 – 1.250in	H-22B (3/per head)	H-23 (3/per blade lock)
CH-21 – 3.000in	H-21 – 1.250in	H-22C (3/per head)	H-23 (3/per blade lock)
CH-22 – 3.500in	H-21 – 1.250in	H-22A (6/per head)	H-23 (3/per blade lock)
CH-23 – 4.000in	H-21 – 1.250in	H-22A (3/per head) & H-22C (3/per head)	H-23 (3/per blade lock)
CH-24 – 4.500in	H-21 – 1.250in	H-22A (3/per head) & H-22C (3/per head)	H-23 (3/per blade lock)